Mahas N. a kol. - RESEARCH ON THE TEMPERATURE - HUMIDITY EFFECTS ON THE TECHNICAL CONDITION OF BRICK-WALLED BUILDINGS

Research on the Temperature-Humidity Effects on the Technical Condition of Brick-Walled Buildings

Nataliia MAHAS, Assoc. Prof., CSc (PhD)
Department of Building Construction,
Faculty of Civil Engineering,
Slovak University of Technology in Bratislava
nataliia.mahas@stuba.sk

Roman RABENSEIFER, Assoc. Prof. Dr.-techn. Ing. arch.
Department of Building Construction,
Faculty of Civil Engineering,
Slovak University of Technology in Bratislava
roman.rabenseifer@stuba.sk

Oleksandr SEMKO, Professor, DrSc
Department of Construction and Civil Engineering,
Educational and Research Institute of Architecture,
Civil Engineering and Land Management,
National University «Yuri Kondratyuk Poltava Polytechnic»
ab.semko_ov@nupp.edu.ua

Olena FILONENKO, Professor, DrSc
Department of Construction and Civil Engineering,
Educational and Research Institute of Architecture,
Civil Engineering and Land Management,
National University «Yuri Kondratyuk Poltava Polytechnic»
ab.filonenko_oi@nupp.edu.ua

Oleg YURIN, CSc (PhD)
Department of Construction and Civil Engineering,
Educational and Research Institute of Architecture,
Civil Engineering and Land Management,
National University «Yuri Kondratyuk Poltava Polytechnic»
ab.yurin_oi@nupp.edu.ua

Volodymyr SEMKO, Professor, DrSc
Department of Structural Engineering,
Institute of Building Engineering,
Faculty of Civil and Transport Engineering,
Poznan University of Technology
volodymyr.semko@put.poznan.pl

Abstract:

The monograph is dedicated to the study of temperature-humidity effects on the technical condition of buildings with brick walls. It analyzes moisture-related damage that affects the durability of structures and the causes of its occurrence. The work is based on the authors’ previously published scientific studies, which included field surveys and modeling of temperature-humidity regimes in building structures. The proposed practical solutions aim to improve the operational reliability of buildings.                                                                           

DOI: 10.61544/FHEJ4298

Literatúra:

1. Semko, O., Yurin, O., Filonenko, O., Semko, V., Rabenseifer, R., Mahas, N. (2023). Investigation of Moisture Condensation on the Surface of the Bottom Chord of a Steel Truss of a Historical Building. Buildings, 13(3), 766. https://doi.org/10.3390/buildings13030766
2. Semko O., Filonenko O., Hasenko L., Mahas N., Rudenko V. (2021). Temperature-humidity regime in the operation of the roofs of historic buildings. Academic journal. Industrial Machine Building, Civil Engineering, 2(57), 47-52 https://doi.org/10.26906/znp.2021.57.2584
3. Heindl, W.; Krec, K.; Panzhauser, E.; Sigmund, A. Wärmebrücken; Springer: Wien, Austria, 1987. (In German)
4. Panzhauser, E.; Rabenseifer, R. Die bauökologische Belastung der umgebenden Außenwelt durch sanierte und nichtsanierte Plattenwohnhäuser anhand eines Beispiels aus Bratislava. In Proceedings of the 1996 International Symposium of CIB Working Commission 67-Energy and Mass Flow in the Life Cycle of Buildings, Vienna, Austria, 4–10 August 1996; pp. 361–366. (In German)
5. Soufeiani, L.; Foliente, G.; Nguyen, K.; San Nicolas, R. Corrosion protection of steel elements in façade systems—A review. J. Build. Eng. 2020, 32, 101759. https://doi.org/10.1016/j.jobe.2020.101759.
6. Martín-Garín, A.; Millán-García, J.A.; Terés-Zubiaga, J.; Oregi, X.; Rodríguez-Vidal, I.; Baïri, A. Improving Energy Performance of Historic Buildings through Hygrothermal Assessment of the Envelope. Buildings 2021, 11, 410. https://doi.org/10.3390/buildings11090410
7. Graham, L.; Scott, M.; Pappas, A. Natatorium Building Enclosure Deterioration Due to Moisture Migration. Buildings 2012, 2, 534–541. https://doi.org/10.3390/buildings2040534
8. You, S.; Li, W.; Ye, T.; Hu, F.; Zheng, W. Study on moisture condensation on the interior surface of buildings in high humidity climate. Build. Environ. 2017, 125, 39–48. https://doi.org/10.1016/j.buildenv.2017.08.041
9. Nguyen, C.K.; Teodosiu, C.; Kuznik, F.; David, D.; Teodosiu, R.; Rusaouën, G. A full-scale experimental study concerning the moisture condensation on building glazing surface. Build. Environ. 2019, 156, 215–224. https://doi.org/10.1016/j.buildenv.2019.04.024
10. Nguyen, C.K.; Teodosiu, C.; Kuznik, F.; David, D.; Rusaouën, G. Full-scale experimental study of moisture condensation on the glazing surface: Condensation rate characterization. IOP Conf. Ser. Mater. Sci. Eng. 2019, 609, 032035. https://doi.org/10.1088/1757-899X/609/3/032035
11. Hong, G.; Kim, D.D.; Kim, B.S. Experimental Investigation of Thermal Behaviors in Window Systems by Monitoring of Surface Condensation Using Full-Scale Measurements and Simulation Tools. Energies 2016, 9, 979. https://doi.org/10.3390/en9110979
12. Nawalany, G.; Sokołowski, P.; Michalik, M. Experimental Study of Thermal and Humidity Conditions in a Historic Wooden Building in Southern Poland. Buildings 2020, 10, 118. https://doi.org/10.3390/buildings10070118
13. Yurin, O.; Mahas, N.; Zyhun, A.; Musiienko, O. Aspects of calculation of resistance vapor penetration of enclosing structures. Academic journal. Industrial Machine Building, Civil Engineering 2020, 2, 96–101
14. Yurin, O.; Mammadov, N.; Semko, P.; Mahas, N. Analysis of the Humidity Condition of Wall Enclosing Structures of Cooling Warehouses and Possible Ways to Improve It. Lecture Notes in Civil Engineering. 2022, 181, 439–448. https://doi.org/10.1007/978-3-030-85043-2_41
15. Colinart, T.; Glouannec, P.; Pierre, T.; Chauvelon, P.; Magueresse, A. Experimental Study on the Hygrothermal Behavior of a Coated Sprayed Hemp Concrete Wall. Buildings 2013, 3, 79–99. https://doi.org/10.3390/buildings3010079
16. Biserni, C.; Imbiombato, A.N. Numerical analysis on building envelope moisture condensation: A case study using the glaser diagram method. AIP Conf. Proc. 2019, 2191, 020023. https://doi.org/10.1063/1.5138756
17. Kon, O.; Caner, İ. The Effect of External Wall Insulation on Mold and Moisture on the Buildings. Buildings 2022, 12, 521. https://doi.org/10.3390/buildings12050521
18. Ingebretsen, S.B.; Andenæs, E.; Gullbrekken, L.; Kvande, T. Microclimate and Mould Growth Potential of Air Cavities in Ventilated Wooden Façade and Roof Systems—Case Studies from Norway. Buildings 2022, 12, 1739. https://doi.org/10.3390/buildings12101739
19. Ksit, B.; Szymczak-Graczyk, A.; Pilch, R. Numerical Simulation of the Impact of Water Vapour and Moisture Blockers in Energy Diagnostics of Ventilated Partitions. Materials 2022, 15, 8257. https://doi.org/10.3390/ma15228257
20. Korenkova, R.; Krusinsky, P.; Pisca, P. Analysis of the Impact of Microclimate in a Roof Space on a Gothic Truss. Constr. Commun. Sci. Lett. Univ. Zilina 2013, 15, 27–31. https://doi.org/10.26552/com.C.2013.4.27-31
21. Kysela, P.; Ponechal, R.; Krušinský, P.; Korenková, R. Pilot monitoring of the internal temperature and humidity in the historic building attic space. Transp. Res. Procedia 2021, 55, 1214–1220. https://doi.org/10.1016/j.trpro.2021.07.102
22. Spišáková, M.; Mokrenko, D. Renovation of roof structure of historical building–case study. Czech J. Civ. Eng. 2021, 6, 71–78. https://doi.org/10.51704/cjce.2020.vol6.iss2.pp71-81
23. Semko, O.V.; Yurin, O.I.; Filonenko, O.I.; Mahas, N.M. Investigation of the Temperature–Humidity State of a Tent-Covered Attic. Lecture Notes in Civil Engineering. 2020, 73, 245–252. https://doi.org/10.1007/978-3-030-42939-3_26
24. Richter, J.; Staněk, K.; Tywoniak, J.; Kopecký, P. Moisture-Safe Cold Attics in Humid Climates of Europe and North America. Energies 2020, 13, 3856. https://doi.org/10.3390/en13153856
25. Kvist Hansen, T. Danish Dwellings with Cold Attics—Ventilation Rates and Air Exchange between Attic and Dwelling. Buildings 2021, 11, 64. https://doi.org/10.3390/buildings11020064
26. Rupp, S.H.; McNeil, S.; Plagmann, M.; Overton, G. Hygrothermal Characteristics of Cold Roof Cavities in New Zealand. Buildings 2021, 11, 334. https://doi.org/10.3390/buildings11080334
27. Gullbrekken, L.; Kvande, T.; Jelle, B.P.; Time, B. Norwegian Pitched Roof Defects. Buildings 2016, 6, 24. https://doi.org/10.3390/buildings6020024
28. Lisitano, I.M.; Laggiard, D.; Fantucci, S.; Serra, V.; Fenoglio, E. Evaluating the Impact of Indoor Insulation on Historic Buildings: A Multilevel Approach Involving Heat and Moisture Simulations. Appl. Sci. 2021, 11, 7944. https://doi.org/10.3390/app11177944
29. Negro, E.; Cardinale, T.; Cardinale, N.; Rospi, G. Italian Guidelines for Energy Performance of Cultural Heritage and Historical Buildings: The Case Study of the Sassi of Matera. Energy Procedia 2016, 97, 7–14. https://doi.org/10.1016/j.egypro.2016.10.008
30. Curto, D.; Franzitta, V.; Guercio, A.; Panno, D. Energy Retrofit. A Case Study—Santi Romano Dormitory on the Palermo University. Sustainability 2021, 13, 13524. https://doi.org/10.3390/su132413524
31. Harrestrup, M.; Svendsen, S. Full-scale test of an old heritage multi-storey building undergoing energy retrofitting with focus on internal insulation and moisture. Build. Environ. 2015, 85, 123–133. https://doi.org/10.1016/j.buildenv.2014.12.005
32. Todorović, M.S.; Ećim-Đurić, O.; Nikolić, S.; Ristić, S.; Polić-Radovanović, S. Historic building’s holistic and sustainable deep energy refurbishment via BPS, energy efficiency and renewable energy—A case study. Energy Build. 2015, 95, 130–137. https://doi.org/10.1016/j.enbuild.2014.11.011
33. Ameen, A.; Bahrami, A.; El Tayara, K. Energy Performance Evaluation of Historical Building. Buildings 2022, 12, 1667. https://doi.org/10.3390/buildings12101667
34. Webb, A.L. Energy retrofits in historic and traditional buildings: A review of problems and methods. Renew. Sustain. Energy Rev. 2017, 77, 748–759. https://doi.org/10.1016/j.rser.2017.01.145
35. Mazzarella, L. Energy retrofit of historic and existing buildings. The legislative and regulatory point of view. Energy Build. 2015, 95, 23–31. https://doi.org/10.1016/j.enbuild.2014.10.073
36. DSTU ISO 10211-1:2005; Thermal Bridges in Building Construction—Calculation of Heat Flows and Surface Temperatures—Part 1: General Methods (ІSO 10211-1:1995, ІDT). Derzhspozhyvstandart of Ukraine, Kyiv, Ukraine, 2008. (In Ukrainian)
37. DBN V.2.6-31: 2021; Thermal Insulation and Energy Efficiency of Buildings. Minregion of Ukraine, Kyiv, Ukraine, 2022. (In Ukrainian)
38. DSTU-N B V.2.6-189: 2013; Methods for Choosing Heat-Insulating Material for Building Insulation. Minregion of Ukraine, Kyiv, Ukraine, 2014. (In Ukrainian)
39. DBN V.2.6-31:2016. Thermal Insulation of Buildings. Minregion of Ukraine, Kyiv, Ukraine, 2016. (In Ukrainian)
40. DBN V.2.6-220:2017. Coating of buildings and structures. Minregion of Ukraine, Kyiv, Ukraine, 2017. (In Ukrainian)
41. Semko, O., Yurin, O., Kos, A., Filonenko, O., Mahas, N. (2023). Analysis of the influence of metal ties at the place of punching window and door openings in brick walls on moisture resistance of the wall. AIP Conference Proceedings, 020021, 2678 https://doi.org/10.1063/5.0118653
42. A.I. Mal'ganov, V.S. Plevkov, A.I. Polishchuk. Restoration and strengthening of building structures of emergency and reconstructed buildings. (Tomsk University Press, Tomsk, 1992), 456 p. (In Russian).
43. Fořt, J., Pavlík, Z., Jerman, M., Černý, R. (2018). Evaluation of thermal performance of window lintel construction detail. IOP Conference Series: Materials Science and Engineering, 012015, 415. https://doi.org/10.1088/1757-899X/415/1/012015
44. Filonenko O.I., Yurin O.I. Energy efficiency of buildings. (Astra, Poltava, 2018), 484 p. (In Ukrainian)
45. Semko, O., Filonenko, O., Yurin, O., Sankov, P., Mahas, N. (2023). Analysis of Influence of Metal Elements of Window and Door Openings in Brick Walls on the Temperature of the Interior Plain of a Wall at the Place of Their Installation. Lecture Notes in Civil Engineering, vol 299, pp 305–319. Springer, Cham. https://doi.org/10.1007/978-3-031-17385-1_25
46. Babenko, M., Savytskyi, M., Bielek, B., Szabó, D., Rabenseifer, R. (2020) Numerical thermal analysis of wall structure for sustainable buildings. In Proceedings of the enviBUILD 2019, pp. 7-12.
47. Yurin, O.I., Semko, O.V. (2013) Vplyv vzaiemnoho roztashuvannia zovnishnoho kuta budynku ta vikonnoho prorizu na temperaturu vnutrishnoi poverkhni kuta. ACADEMIC JOURNAL Series Industrial Machine Building Civil Engineering. Vol. 4(2). 182–190. (In Ukrainian).
48. Semko, O., Vynnykov, Y., Filonenko, O., Yurin, O., Ilchenko, T., Hranko, O., Semko, V., Salles, A., Mateus, R., Bragança, L., Rabenseifer, R., Mahas, N. (2025). To the Issue of Assessment of the Technical Condition of Underground Structures of Buildings. Sustainability, 17(5), 2264. https://doi.org/10.3390/su17052264
49. Semko O., Filonenko O., Yurin O., Mahas N., Rudenko V. (2021). Moisture protection of structures adjacent to the ground in historic buildings. Academic journal. Industrial Machine Building, Civil Engineering, 2(57), 53-58 https://doi.org/10.26906/znp.2021.57.2585
50. Semko O., Filonenko O., Yurin O., Ilchenko T., Semko V., Rabenseifer R., Mahas N. TO THE ISSUE OF ASSESSMENT OF THE TECHNICAL CONDITION OF BASEMENT STRUCTURES OF BUILDINGS. Conference proceedings of the International Scientific and Practical Conference “Innovations in construction and smart building technologies for comfortable, energy efficient and sustainable lifestyle” (20−21 February 2024): proceeding papers edited by Mykola Savytskyi, Kostiantyn Sukhyi, Vladyslav Danishevskyy, Analolii Radkevych, Ivan Nazarenko, Yurii Proidak. Dnipro: PSACEA, 2024, p. 51-54.
51. Caruso, M.; Pinho, R.; Bianchi, F.; Cavalieri, F.; Lemmo, M.T. A Life Cycle Framework for the Identification of Optimal Building Renovation Strategies Considering Economic and Environmental Impacts. Sustainability 2020, 12, 10221. https://doi.org/10.3390/su122310221
52. Freitas, M.C.D., Tavares, S.F., Bragança, L., Barbosa, S. The Rehabilitation of Buildings from the Perspective of Circular Economy Principles. In: Creating a Roadmap Towards Circularity in the Built Environment, Bragança, L., Cvetkovska, M., Askar, R., Ungureanu, V., Еds.; Springer Tracts in Civil Engineering, Springer, Cham, 2024. https://doi.org/10.1007/978-3-031-45980-1_22
53. Borg, R.P. Standards for Recycling Oriented Deconstruction and Classification of Waste. In: Creating a Roadmap Towards Circularity in the Built Environment, Bragança, L., Cvetkovska, M., Askar, R., Ungureanu, V., Еds.; Springer Tracts in Civil Engineering, Springer, Cham, 2024. https://doi.org/10.1007/978-3-031-45980-1_35
54. Wu, B.; Maalek, R. Renovation or Redevelopment: The Case of Smart Decision-Support in Aging Buildings. Smart Cities 2023, 6, 1922-1936. https://doi.org/10.3390/smartcities6040089
55. Tworzewski, P.; Raczkiewicz, W.; Czapik, P.; Tworzewska, J. Diagnostics of Concrete and Steel in Elements of an Historic Reinforced Concrete Structure. Materials 2021, 14, 306. https://doi.org/10.3390/ma14020306
56. Kosior-Kazberuk, M.; Krentowski, J.R.; Wardach, M. Diagnostics of the RC Roofing Structure of the 100-Year-Old Municipal Theatre Facility. Materials 2022, 15, 7438. https://doi.org/10.3390/ma15217438
57. Terlikowski, W. Problems and Technical Issues in the Diagnosis, Conservation, and Rehabilitation of Structures of Historical Wooden Buildings with a Focus on Wooden Historic Buildings in Poland. Sustainability 2023, 15, 510. https://doi.org/10.3390/su15010510
58. Grzmil, W.; Zapała-Sławeta, J.; Juruś, J. Analysis of the Technical Condition of a Late 19th Century Public Building in Łódź. Materials 2023, 16, 1983. https://doi.org/10.3390/ma16051983
59. Wardach, M.; Krentowski, J.R. Diagnostics of Large-Panel Buildings—An Attempt to Reduce the Number of Destructive Tests. Materials 2024, 17, 18. https://doi.org/10.3390/ma17010018
60. Studziński, R.; Ścigałło, J.; Ratajczak, M.; Ciesielczyk, K. Impact of Heterogeneous Soil Conditions on the Life Cycle Assessment of a Multi-Storey Reinforced Concrete Structure. Sustainability 2024, 16, 6771. https://doi.org/10.3390/su16166771
61. EN 1997-1:2004; Eurocode 7: Geotechnical design – Part 1: Generalrules. CEN: Brussels, Belgium, 2004
62. EN 1997-2:2004; Eurocode 7: Geotechnical Design. Ground investigation and testing. CEN: Brussels, Belgium, 2007
63. DBN B.2.2-5:2023; Protective shelters. Ministry of Infrastructure of Ukraine: Kyiv, Ukraine, 2023; (In Ukrainian)
64. Semko, V., Mahas, N. Assessment of Existing Structures for Elongation of the Buildings Lifecycle Based on Ukrainian Experience and Codes. In: 4th International Conference "Coordinating Engineering for Sustainability and Resilience" & Midterm Conference of CircularB “Implementation of Circular Economy in the Built Environment”. CESARE 2024, Ungureanu, V., Bragança, L., Baniotopoulos, C., Abdalla, K.M., Еds.; Lecture Notes in Civil Engineering, vol 489. Springer, Cham, 2024. https://doi.org/10.1007/978-3-031-57800-7_13
65. Becker, B., Reichel, F., Bachmann, D., Schinke, R. High groundwater levels: Processes, consequences, and management. WIREs Water. 2022, 9(5), e1605. https://doi.org/10.1002/wat2.1605
66. He, R., Tiong, R.L.K., Yuan, Y., Zhang, L. Enhancing resilience of urban underground space under floods: Current status and future directions. Tunnelling and Underground Space Technology 2024, 147, 105674. https://doi.org/10.1016/j.tust.2024.105674
67. DSTU B V.3.1-2:2016; Repair and reinforcement bearing and enclosing building structures and bases of buildings and constructions. Minregion of Ukraine: Kyiv, Ukraine, 2016. (In Ukrainian)
68. DSTU 9273:2024; Guidelines for inspection of buildings and facilities for identification and evaluation of their technical condition. Mechanical resistance and stability. UkrNDNC: Kyiv, Ukraine, 2024. (In Ukrainian)
69. Kryvosheiev, P., Farenyuk, G., Tytarenko, V., Boyko, I., Kornienko, M., Zotsenko, M., Vynnykov, Yu., Siedin, V., Shokarev, V., Krysan, V. Innovative projects in difficult soil conditions using artificial foundation and base, arranged without soil excavation. In: Proc. of 19th International Conference on Soil Mechanics and Geotechnical Engineering. Seoul. ICE Publishing. 2017. pp. 3007–3010.
70. Semko, O., Filonenko O., Yurin, O., Mahas, N., Rudenko, V., Ilchenko, T. (2023). Retrospective analysis of wall waterproofing structures to determine the main directions of the relevant restoration work. Academic Journal Industrial Machine Building Civil Engineering, 1(60), 69–75. https://doi.org/10.26906/znp.2023.60.3558
71. Filonenko, O., Leshchenko, M., Rozdabara, O., Duka, O., Pashchenko, V., Filonenko, D. (2019). Improving waterproofing properties in the wall basement area by injection method. ACADEMIC JOURNAL Industrial Machine Building, Civil Engineering, 2(53), 122-127 https://doi.org/https://doi.org/10.26906/znp.2019.53.1902
72. Davison, R. C. (1911). The Problem of Waterproofing. Scientific American, 104(11), 273–291. http://www.jstor.org/stable/26008410
73. Oliver, A. (1997). Dampness in Buildings. 2nd ed. Blackwell Science, London
74. Rose, W. B. (2005) Water in buildings: An architect’s guide to moisture and mold. John Wiley@Sons, Hoboken.
75. Schmidt, H. (1999). Historische Bauwerksabdichtungen - Traditionelle und neuzeitliche Maßnahmen zum Schutz gegen Bodenfeuchtigkeit und zur Trockenlegung feuchter Wände. Bautechnik, 76, 581-598. https://doi.org/10.1002/bate.199903790
76. Michette, M., Lorenz, R., Ziegert, C. (2017). Clay barriers for protecting historic buildings from ground moisture intrusion. Heritage Science, 5, 31. https://doi.org/10.1186/s40494-017-0144-3
77. Kubal, M. (1999). Construction Waterproofing Handbook. McGraw-Hill, New York
78. Henshell, J. (2000). The Manual of Below-Grade Waterproofing Systems. John Wiley, New York
79. Fadeev N. (1930). Construction art: a manual for technical schools. 7th ed. Gosizdat
80. Popov N. A. (ed.). (1950). Architect's handbook: Volume IX, first half-volume: Building materials. Publishing House of the USSR Academy of Architecture
81. Kazacek G.A. (ed.). (1955). Handbook of the master builder. 2nd ed., rev. State Publishing House
82. Technical Specifications for the Performance and Acceptance of Construction Works. Section XII. Works on the arrangement of waterproofing. (1953). Ministry of Housing and Civil Construction of the Ukrainian SSR, Kiev
83. Filonenko, O. (2017). Definition of the parameters of thermal insulation in the zone of building foundation according to the ground freezing depth. Energy Efficiency, 11(3), 603-626. https://doi.org/10.1007/s12053-017-9600-x
84. Luchko, Y.Y., Nazarevich, B.L., Parneta, B.Z. (2005). The technology of mounting horizontal waterproofing in the brick walls. Resource-Economical Materials, Structures, Buildings and Structures, 13, 322-328. (In Ukrainian)
85. Luchko, Y.Y., Nazarevich, B.L. (2007). Results of experimental studies of the moisture content of brick wall samples. Bulletin of the Odessa State Academy of Civil Engineering and Architecture, 26, 201-210. (In Ukrainian)
86. Kravchunovskaia T.S., Mikhailova I.A. & Stoliarov V.A. (2017). Features of application of injectable construction materials ARCAN WATERPROOF when performing repair and reconstruction works. Construction, materials science, mechanical engineering: Starodub readings, 90-94.
87. Sáncheza, M., Fariab, P., Ferrarac, L., Horszczarukd, E., Jonkerse, H.M., Kwiecieńf, A., Mosag, J., Peledh, A. et. al. (2018). External treatments for the preventive repair of existing constructions: A review. Construction and Building Materials, 193(30), 435-452. https://doi.org/10.1016/j.conbuildmat.2018.10.173
88. Kapustin, F.L., Pomazkin, E.P. (2018). Effect of Waterproofing Penetrating Capillary Mixture on Concrete Waterproofness and Cement Stone Microstructure. Power Technology and Engineering, 52(2), 168-171. https://doi.org/10.1007/s10749-018-0927-z
89. Drochytka, R., Černý, V., Melichar, J. (2017). Examination methods for injection waterproofing screens in various building materials. Materiali in Tehnologije, 51(3), 529-532. https://doi.org/10.17222/mit.2015.192
90. Zhang Yi Teng, Zuo Lian, Yang Jin Chao, Zhao Wei Xia, Zeng Xiang Xiong. (2019). Influence of Cementitious Capillary Crystalline Waterproofing Material on the Water Impermeability and Microstructure of Concrete. Materials Science Forum, 953, 209-214. https://doi.org/10.4028/www.scientific.net/MSF.953.209
91. DSTU B V.2.7-170:2008; Methods of determination of middle density, moisture content, water absorptions porosity and watertightness. Minregion of Ukraine: Kyiv, Ukraine, 2009. (In Ukrainian)
92. VSN 57-88(r) Regulations on technical inspection of residential buildings. Goskomarkhitekturi, Moscow. (in Russian)
93. ORD 00 000 89. ORD. Technical operation of steel structures of industrial buildings. Ministerstvo chernoy metallurgii SSSR, Moscow. (in Russian)
94. Ukrniiproektstalkonstruktsiya (1989) Manual on design of reinforcement of steel structures (to SNiP P-23-81*). Stroyizdat, Moscow. (in Russian)
95. Kharkovskii Promstroiniiproekt (1992) Recommendations on design of reinforcement of reinforced concrete structures of buildings and structures of reconstructed enterprises. Above-ground structures and constructions. Stroyizdat, Moscow. (in Russian)
96. Methodological Recommendations on Inspection of Certain Parts of Buildings (Structures) and Their Constructions. Derzhbud of Ukraine, Kyiv. (in Ukrainian)
97. DBN 362-92 Assessment of the Technical Condition of Steel Structures of Industrial Buildings and Structures in Operation. Derzhbud of Ukraine, Kyiv. (in Ukrainian).
98. NPAOP 45.2-1.01-98 Rules for inspections, assessment of technical condition and certification of industrial buildings and structures. State Committee of Ukraine for Supervision of Labour Protection, Kyiv. (in Ukrainian).
99. DSTU-N B V.1.2-18:2016. Guidelines for inspection of buildings and facilities for identification and evaluation of their technical condition. UkrNDNC, Kyiv. (in Ukrainian).
100. DSTU B V.2.6-210:2016. Assessment of the technical condition of steel building structures in operation. Ukrarkhbudinform, Kyiv. (in Ukrainian).
101. TsNIISK im. Kucherenko (1984) Recommendations on strengthening masonry structures of buildings and structures. Stroyizdat, Moscow. (in Russian)
102. ISO 13822:2010. Basis for design of structures –Assessment of existing structures. ISO, Geneva.
103. DBN V.1.2-6:2021 Basic requirements for buildings and structures. Mechanical resistance and stability. Ministry of Regional Development of Ukraine, Kyiv. (in Ukrainian).
104. DBN V.1.2-14:2018 General principles of ensuring the reliability and structural safety of buildings and structures. Ministry of Communities and Territories Development of Ukraine, Kyiv. (in Ukrainian).
105. EN 1990:2002 Eurocode - Basis of structural design. CEN, Brussels.
106. ISO 2394:2015 General principles on reliability for structures. ISO, Geneva.
107. Perelmuter A.V. (2007) Selected problems of reliability and safety of building structures. ACB, Moscow. (in Russian)
108. Rzhanitsyn A.R. (1946) Calculation of metal I-beams which have received initial curvature in the horizontal plane. TsNIPS, Moscow. (in Russian)
109. Semko V. O., Hudz, S.A. (2006) Calculation and experimental study of steel beams with curvature in the horizontal plane. Collection of scientific works "Resource-saving materials, constructions, buildings and structures" 14:317-322. (in Ukrainian).
110. Pichugin S.F., Semko V.O. (2008) Calculation methodology for steel beams with general bending in the horizontal plane. Modern building constructions from metal and wood. Collection of scientific works. 1:241-245. (in Russian)
111. Gordeev V. N., Lantukh-Lyashchenko, A. I., Pashynskyi V.A., Perelmuter A.V., Pichugin S.F. (2005) Loads and impacts on buildings and structures. Steel, Kyiv. (in Russian)
112. Semko V. O. (2006) Revised calculation of steel beams with one-sided cutouts in the shelf. ACADEMIC JOURNAL Industrial Machine Building, Civil Engineering 18:122-128. (in Ukrainian).
113. Pichugin S.F., Semko V.O. (2007) Calculation procedure for steel beams with one-sided notches in the flange. Modern building constructions from metal and wood. Collection of scientific works. 1:165-169. (in Russian)
114. Voskobiinyk, O.P. (2014) Composite steel and concrete structures: reliability, technical conditions, risks: a monograph. Donbas, Donetsk. (in Ukrainian).
115. Klymenko Je.V. (2004) Technical operation and reconstruction of buildings and structures: a textbook. Centr navchaljnoji literatury, Kyiv. (in Ukrainian)
116. Blikharskyy Z.Ja. (2008) Reconstruction and strengthening of buildings and structures: a textbook. Vydavnyctvo Ljvivsjkoji politekhniky, Lviv. (in Ukrainian)
117. Semko O.V. (2004) Probabilistic aspects of calculation of composite steel and concrete structures. Steel, Kyiv. (in Ukrainian).
118. Korolov V., Gibalenko O., Korolov P., Sujarko V. (2010) Assessment and management of corrosion hazard risks based on the data of monitoring the state of corrosion protection of structures of buildings and structures. Problems of corrosion and corrosion protection of materials. Physical and chemical mechanics of materials 8(2):575-580 (in Ukrainian).
119. Farenyuk G.G. (2009) Methodological aspects of ensuring energy efficiency and thermal reliability of buildings. Stroyteljstvo, materyalovedenye, mashynostroenye: Sb. nauch. trudov 50: 593-597. (in Ukrainian).
120. Pashynskyi V.A., Farenyuk G.G. (2010) Assessment of the probability of thermal failures of structures. Construction, Material Science, Engineering: Collection of scientific works 56:305 – 310. (in Ukrainian).
121. Semko V. O., Leshсhenko M. V., Rud A. G. (2016) Experimental study of variability of thermal conductivity of insulation materials. ACADEMIC JOURNAL Industrial Machine Building, Civil Engineering 1(46):60–67
122. Leshсhenko M. V., Semko V. O. (2015) Thermal characteristics of the external walling made of cold-formed steel studs and polystyrene concrete. Magazine of Civil Engineering 8(60):44-55 (in Russian) http://dx.doi.org/10.5862/MCE.60.6
123. Pichugin S.F., Semko V.O. (2016) The probability of the thermal failure of building envelopes made of cold-formed steel elements based on local temperature decrease criterion. Collection of Scientific Works of the Ukrainian State University of Railway Transport 160:25-34. (in Ukrainian). https://doi.org/10.18664/1994-7852.160.2016.69985
124. Semko V.O. (2016) Methodology for determining the probability of thermal failure of enclosing structures made of cold-formed steel elements by thermal performance. Construction, Material Science, Engineering: Collection of scientific works 91:140-147. (in Ukrainian).
125. Pichugin S.F., Semko V. O., Leshсhenko M. V. (2017) Probabilistic analyses of thermal performance of the wall from light-gauge thin-walled steel structures. ACADEMIC JOURNAL Industrial Machine Building, Civil Engineering 1(48):144-155. https://doi.org/10.26906/znp.2017.48.788
126. Semko V., Leshchenko M., Cherednikova O. (2018) Standardization of Required Level Probability of No-Failure Operation of the Building Envelopes by the Criterion of Total Thermal Resistance. International Journal of Engineering & Technology 7(3.2):382–387. https://doi.org/10.14419/ijet.v7i3.2.14557
127. Semko V. O. (2017) Steel cold-formed thin-walled structures: a monograph. ASMI LLC, Poltava. (in Ukrainian). http://dx.doi.org/10.13140/RG.2.2.30217.77928
128. Perelmuter A.V., Pichugin S.F. (2023) Some features of calculating the reliability of damaged steel structures. Science and construction 35(1):15-26. (in Ukrainian). https://doi.org/10.33644/2313-6679-1-2023-3