Total number of classrooms and laboratories in the faculty, where planned teaching takes place during the academic year is 67. The classrooms for teaching are divided to general classrooms and aulas for lecturing the common subjects and also to special classrooms and laboratories, which are specific for an actual study program. Laboratories of the Institute of production technologies: https://www.mtf.stuba.sk/sk/ustavy/ustav-vyrobnych-technologii/veda-a vyskum/laboratoria.html?page_id=4480 Equipment of the laboratories for technologies: https://www.mtf.stuba.sk/sk/ustavy/ustav-vyrobnych-technologii/veda-a-vyskum/laboratoria/laboratoria-vyrobnych-technologii-metrologie-montaze-a-materialov.html?page_id=11600 Laboratory name Education outputs Subject Laboratory of welding technology Student will acquire the knowledge about the effect of welding on welded materials, know-how about individual technologies of welding, brazing/soldering and thermal splitting of materials. He can make the drawing documentation of a simple welded structure. He is capable to prepare the technological procedure for fabrication of a simple weldment. Production technologies III Technical preparation of welding production Laboratory of forming technology Student will acquire the knowledge about division of technological processes of surface and volume forming, choice of suitable semi-products and blanks, determining the number and sequence of basic works and operations, selection of technological parameters, methodology of scheduling the technological workplaces, capacity and economy calculations with the aim to design the technological procedure of production and layout of a production system for series production of blanks by surface and volume forming. , kapacitných a ekonomických výpočtoch s cieľom navrhnúť technologický postup výroby a štruktúru výrobného systému na sériovú výrobu výtvarkov plošným a objemovým tvárnením. Design of forming processes Laboratory of machining technology Student will acquire the knowledge about division of technological processes of surface and volume forming, choice of suitable semi-products and blanks, determining the number and sequence of basic works and operations, selection of technological parameters, methodology of scheduling the technological workplaces, capacity and economy calculations with the aim to design the technological procedure of production and structure of a production system for series production of blanks by machining. Design of machining processes Excellence Centre of 5-axial machining Student will acquire the knowledge about the principles of additive production and 3D printing. He will be acquainted with the materials for additive production. He will master the technologies as (ME) Material extrusion, VAT Photopolymerization, (PBF) Powder Bed Fusion, (BJ) Binder Jetting, (MJ) Material Jetting, (DED) Direct Energy Deposition, Sheet Lamination, Case studies from the field of additive production, Modelling for additive production, Software for additive production, Automation of additive and hybrid production, Hybrid production. Fundamentals of the additive and hybrid production
Information provision of study programmes is provided by the workplaces of the Department of Science, Research and Library and Information Services of the Faculty of Materials Science and Technology SUT in Trnava: https://www.mtf.stuba.sk/sk/odbory/odbor-poznatkoveho-manazmentu.html?page_id=1850 Academic Library: https://www.mtf.stuba.sk/sk/odbory/odbor-poznatkoveho-manazmentu/akademicka-kniznica-1.html?page_id=17421 AlumniPress Publishing House: https://www.mtf.stuba.sk/sk/odbory/odbor-poznatkoveho-manazmentu/vydavatelstvo-alumnipress-1.html?page_id=17423 Provision of study literature: • permanent acquisition of study literature financially secured by a special fund in the faculty budget, • online availability of electronic scripts for all study programmes implemented at faculty through the Academic Information System (AIS) and the ELVIRA digital library, • unlimited access to study literature for students using self-service borrowing and returning stations, • access to study literature for students with specific needs. Provision of electronic information resources: • access to world bibliographic databases: https://www.stuba.sk/sk/zamestnancov/aktuality-a-informacie/virtualna-kniznica/elektronicke-informacne-zdroje.html?page_id=3832 • electronic access to Slovak Technical Standards: https://www.stuba.sk/sk/diani-na-stu/prehlad-aktualit/normy-stn-spristupnene-pre-studentov-stu.html?page_id=13811 • access to patent information: https://www.stuba.sk/sk/zamestnancov/aktuality-a-informacie/virtualna-kniznica/patentove-databazy-a-registre.html?page_id=8811 • access to the digital archive of final theses (the academic library is building a digital archive of final theses according to individual study programs), • access to digital objects of publishing activities and reviews for publishing activities (the publishing activity records staff digitize all outputs of publishing activities carried out at the faculty), • access to e-books in the SUT fund: https://www.stuba.sk/sk/vyskume/virtualna-kniznica-stu/virtualna-kniznica/e-knihy-na-stu.html?page_id=16728 Providing the study programmes with the services of the AlumniPress Publishing House: • implementation of publishing activities in accordance with the Statute of the faculty publishing activities and the faculty's editorial plan approved by the editorial committee, management and scientific council of the faculty, • publishing scientific monographs of faculty employees, which are electronically available at: https://www.mtf.stuba.sk/sk/odbory/odbor-poznatkoveho-manazmentu/vydavatelstvo-alumnipress/vedecke-monografie-na-predaj.html?page_id=13562 • promotion OpenAccess policy and use of the Creative Commons public license. Information provision of study programmes through information systems used at the faculty: AIS - academic information system, through which activities are provided in the following areas: • education (student records, study progress, study programmes, study programme supervisors, electronic scripts, study literature, e-learning and testing), • research (project records, habilitation theses records), • economy (student social affairs), • operation (room reservations, timetable, car requests), • quality and satisfaction/other (document server, e-mail server, wifi-eduroam). ARL (Advanced Rapid Library) - publishing activity record system, through which activities are provided in the following areas: • education (records and digitization of students' final theses), • research (records of publishing activity and feedback, records of academic library users, online catalogue of the academic library, loans in the academic library). ELVIRA Digital Library – contains electronic textbooks, monographs and e-books. Access is based on login as in AIS. https://www.mtf.stuba.sk/sk/odbory/odbor-poznatkoveho-manazmentu/akademicka-kniznica-1/digitalna-kniznica-elvira.html?page_id=17427
Study programmes are implemented in full-time form with the fact that selected pedagogical activities (e.g. submitting semestral works focused on information technologies) can also be implemented remotely. In an emergency situation, most subjects can be implemented fully remotely, as was the case in the academic years 2019/2020 and 2020/2021. The rules for transitioning to the distance form are regulated by the Study Regulations of the Slovak University of Technology in Bratislava, as amended by Addenda No. 1 and 2. – Article 48. https://www.stuba.sk/sk/studium/legislativa-v-oblasti-vzdelavania/studijny-poriadok-stu.html?page_id=4560 Part of the teaching in the full-time combined method of study is implemented remotely using information and communication technologies and supporting study materials. More information is provided in the course information sheets. During the emergency situation, courses can be delivered remotely via Google Meet or Microsoft Teams.
MASAM Ltd., MASAM R&D Ltd. – training sessions, courses, final theses Eiben Ltd., Vlkanová – training sessions, courses, final theses Matador Automotive Vráble, Inc. – training sessions, courses, final theses Slovak Welding Research Institute (VUZ), Bratislava – training sessions, courses, final theses FIRST WELDING COMPANY, Inc. Bratislava – training sessions, courses, final theses
Is a place of first contact for an applicant and student. Offers counselling and support services for the admission process, and in all areas related to studies - specifically enrollment, creation of a study plan, fulfillment of study obligations, recognition of subjects, change of study programme, interruption of studies, tuition fees, social care, scholarships and accommodation. Additionally, it also offers help in domestic internships and mobilities.
Methodically guides and coordinates counselling services for applicants and students in the areas of education and social care at STU. Directs appeal proceedings to decisions issued by faculty authorities. Offers services of issuing and verifying documents of study completion, issuing of duplicates of documents of study, recognition of documents for applicants, decisions to award scholarships, remit tuition and support for student organizations at STU.
In cooperation with faculty coordinators, offers counselling services in the area of effective studying, for students with specific needs, in career development, social counselling and counselling in the area of mental health and wellbeing.
Aids students and graduates of STU to develop their entrepreneurship ideas in incubator programmes START and UP.
In cooperation with faculty coordinators, coordinates and organizes international mobilities and internships of STU students, as well as ensures related studies.
STU provides accommodation for students in seven student dormitories - SD Mladá garda, SD Jura Hronca, SD Nikosa Belojanisa, SD Akademik, SD Dobrovičova, SD Mladosť, SD Miloša Uhra in Trnava.
Rules for submission of requests and regulations for accommodation allocation for STU students.
Breakfast, lunch and dinner is offered in canteens of student dormitories of STU. During the day, dining halls and cafeterias are available at places of learning or nearby faculties. A student ID is valid in all STU dining facilities. STU Canteen Reservation System.
STU regularly supports the activities of non-profit organizations and STU student associations.
Gyms, workout spaces, climbing wall, three swimming pools, multi-use courts and other sport fields in faculty and dormitory premises are available to STU students.
Adjacent to STU, the university art ensemble has three separate parts:
